BAK Revolver X2 Tonneau Cover
Flush Fit
The Revolver X2 conveniently works like a roll-up tonneau cover, but the clever design makes use without Velcro or snaps. This creates a flush fit design and simple usability.
Unmatched Security
BAK’s patented Rotational Locking Rails allows the side mounting rails to automatically secure the cover to the truck bed when the cover is closed. A locked tailgate keeps the truck bed fully locked down.
No Restrictions
Simply roll the cover up to the cab for full-bed access without removing the cover. Stake pocket holes are always available, and the cover can be secured open while driving by using the two buckle straps at the front of the bed. The rear view mirror will not be blocked.
One-Handed Operation
Easy to use, automatic slam latches work by conveniently locking the cover to the rear mounting rails on both sides of the truck bed. Pulling the release cable from either side of the bed will unlatch the cover, making it ready to roll up.
Weather Resistant Design
The surface of the Revolver X2 is covered in vinyl so water cannot make its way through the aluminum slats. Weather resistant seals form a tight seal to the bed rails to help keep the elements out.
No-Drill Clamps
Installing the Revolver X2 is as simple as lining the rails up and tightening down the clamps. The cover bolts on at the front of the bed, then rolls out and latches to the rear of the bed. No special tools needed.
Spec Sheet
Weight Capacity |
400 lbs |
Mounting Profile |
Flush |
Tonneau Material |
Aluminum w/ Vinyl |
Tonneau Finish |
Vinyl Grain |
Made In USA |
Yes |
Bed Caps |
Works With Bed Caps |
Warranty |
3 Years |
Key Feature |
Full Bed Access, Stake Pocket Holes Partially Accessible, Works With Most 5th Wheel Hitches |
Brand |
BAK |
What's In The Box
- 1 Pair Rails (L and R)
- Roll Top Assembly
- Bulkhead Seals
- 6 x C Clamps
- 2 x Strap Assembly Clamps
- 4 x D Shaped Cab Bumpers
- 4 x Mounting Bolts
- 4 x Rubber Washers
- 4 x Large Flat Washers
- 4 x Lock Nuts
Need more help?
We pride ourselves in providing videos with clear, step-by-step instructions that should cover just about every application. However, we know not all makes and models will have the same steps. If you need something cleared up, give us a shout. We’ve seen it all and are more than happy to help!
855-294-1351
